ruettelbohle large mooser betonflaechenfertiger beton abziehen
 

Rüttelbohlen MSB

im Baukastensystem bis zu 26m

Elemente von
0.50m | 0.75m | 1.00m | 1.50m | 2.00m | 3.00m |

Sonderlängen auf Anfrage lieferbar

 

MSB Large
ruettelbohle umbausatz mooser flaechenfertiger

 
 

Rüttelbohlen Umbausatz

geieignet für Noggerath, Belidor, Tremix, Contec, Atlas Copco - und ähnliche Rüttelbohlen

in wenigen Stunden direkt auf der Baustelle umgebaut ohne Welle, ohne Stehlager, ohne Kupplungen, ohne Gummikreuze, ohne Keilriemen und ohne Zentralantrieb

MSB Umbausatz
ruettelbohle kompatibel mooser msb passt auf andere bohlen
 

Rüttelbohle Kompatibel

Passend zum Umbausatz für wellenbetriebene Rüttelbohlen.
Eigenes Rüttelbohlensystem -must fit - kompatibel zu nahezu allen
SVM, SVE, Vario und Variant-Systemen.
 
 
  • RÜTTELBOHLEN NEWS: the MSB compatible truss screed (more)
  • Rüttelbohlen im Einsatz: Mooser truss screed in action (more)

external pneumatic framework vibrator

RüMoo compressed air vibrator RM - the adjustable pneumatic vibrator

The RüMoo framework vibrator is a new development.
What is new is that the air pressure and air volume, i.e. the speed and thus the vibration behavior on the housing of the RüMoo compressed air vibrator, can be regulated.
This allows fine adjustments to be made that were not possible before.

ruettler ruemoo ruetteltechnik mooser

Download: Brochure

In terms of design, we are able to quickly change and produce the sizes of the RüMoo compressed air vibrator for special applications.
A wide variety of rotor weights can be installed in the RüMoo type RM compressed air vibrator. The centrifugal force can e.g. in the same
Housing can be increased by approx. 1.8 times - by changing the unbalance weight.
A cost-effective alternative to performance variability is thus given.
The rapid start-up of the RüMoo mounted vibrator runs through the natural frequency of the respective component in the range of seconds,
the component is stressed as little as possible.
With the RüMoo Type RM, depending on the concrete slump, the concrete formulation, the reinforcement and the formwork type, concrete compaction depths are
up to 80cm and more, built on one side, possible.
From a compressor size of approx. 4 m³ / min up to 4 RM60 vibrators can be operated simultaneously.
The concreting of a stationary formwork equipped with RüMoo compressed air vibrators (e.g. tunnel formwork) can take place from a compressor size of approx. 6m³ / min,
at about 6bar. When using a pressure regulator, the entire system can be controlled in speed. The higher the pressure
the higher the speed - and vice versa.
The RüMoo compressed air vibrators start up in almost every situation without any problems.
RüMoo compressed air vibrators are winterproof. With upstream oiler almost maintenance-free.